¶ Network
¶ wired network
- R1 provides a single network port. This network port can be connected to the external network. Connect the network port to the Gigabit network port of the router through a network cable.
- Open the terminal and click
Terminalat the bottom of the main interface`
- Query the network port IP address, taking eth0 as an example here
ifconfig eth0
- Enter the following command to test network port connectivity
ping -I eth0 -c 10 www.baidu.com
¶ 4G dial-up
-
Hardware connection
-
Software configuration (network verification)
a. Check whether/dev/ttyUSBis generated
lsusb
Bus 001 Device 003: ID 2c7c:0125 Quectel Wirwless Solutions Co., Ltd. EC25 LTE modemappears. The 4G module is recognized.
b. View the wwan0 network node
sudo ifconfig
wwan0: flags=193<UP,RUNNING,NOARP> mtu 1500node appears.
c. Verify the network
ping www.google.com