¶ Preparation
- Power cord
- YY3588 Development Board
- HDMI, EDP or MIPI Screens
- SATA+FPC cable+FPC to SATA transfer board
The FPC specifications used are 20pin-0.5mm on the same surface.
¶ Hardware connection
Connect SATA facing the SATA letter print on the YY3588 development board, and then power on.
¶ SATA use
SATA needs to be formatted as FAT32 on the computer by yourself!!! (Or format SATA in Android),
Please back up SATA data before formatting!!! It must be formatted in FAT32 format to be recognized. NTFS format and exFAT format cannot be recognized. After connecting, you can operate SATA like using a USB flash drive.
After powering on and entering the system
