¶ Adapter board
When using SATA hard drives in X1, a SATA adapter module is required. The SATA adapter module is compatible with all series motherboards with FPC SATA interfaces, and can be connected to 2.5 "or 3.5" SSD/HDD. The SATA adapter board and X1 are connected with FPC cables and shielded with aluminum foil to minimize signal interference
¶ Physical image of SATA adapter board
The connection cable used for the SATA adapter board is a 20P FPC flexible ribbon cable with a spacing of 0.5mm, as shown in the following figure:
front side：
reverse side：
X1 connection SATA adapter board：
Attention: To prevent burning out, please power off the board before connecting to the SATA hard drive